|
| |
|
|
Ultrasonic distance measurement
Giemza, Michal ; Žák, Jaromír (referee) ; Sedláček, Jiří (advisor)
This thesis describes the design and realization of an ultrasonic distance meter. Is discussed about the principle of distance measurement using ultrasound and all physics laws, that occur during the measurement. It was selected the most appropriate measurement method, was also discussed about different types of ultrasonic transducers and was selected an appropriate converter for the specified task. The following part describes all function parts of the meter together with the processing of the detected ultrasonic signal. Next part is focused on the realization of the meter and programming, including the control of the graphical display and communication over the USB bus. The last part deals with the measurement with the completed meter to verify the functionality and the right choice of measurement method and circuit solution.
|
|
|
Precision Ranging Using Ultrasound Waves
Hlaváč, Štěpán ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This project describes solutions of the precision rating using ultrasound waves with range measurement distance to 20 cm. It informs about basic properties of ultrasonic waves and its distribution in the environment. Selects the most appropriate methods for implementing distance meter. The document includes a proposal for block design and functional solutions to individual blocks of the device. This paper contains informations which was measured in the laboratory. The selected part of the design is simulated in PSpice program. It describes the implementation process and the precision of measurement.
|
|
|
Eliminator of dental calculus
Šobich, Adam ; Sekora, Jiří (referee) ; Rozman, Jiří (advisor)
Bachelor’s thesis is focused on system design of eliminator of dental calculus operating at a frequency of 27 kHz and reaching the intensity of ultrasound on the applicator tip to 5 W/cm2. The work analyzes problems of dental calculus, principle of ultrasonic waves and the physical phenomena occurring in the environment, which it passes. Another part of the work describes the creation of waves using ultrasonic transducer and the amplification of ultrasound in the waveguide. Practical part of work is presented by functional diagram, which describes the sequence and function of the main parts of the device. The Bachelor’s thesis presents individual steps for design of applicator and the circuit for eliminator of dental calculus, including calculations and diagrams. The resulting circuit is experimentally verified and supplemented with draft of the printed circuit board.
|
|
| |
|
|
Ultrasonic measurement system for the analyzing of air floating around the PV module
Ondraczka, Lukáš ; Jandová, Kristýna (referee) ; Vaněk, Jiří (advisor)
The work deals with development and assembly of a prototype of the analog part of ultrasonic measurement system for the analyzing of air floating around the photovoltaic module. This prototype consists of the exciter, amplifier, ultrasonic transducers and receiver. The work builds on Ing. Jiří Hofman’s previous work, where was also created a prototype’s block diagram. The work uses PSPICE for prototype development and laboratory tests for its assembly. Due to the scale of work will this bachelor thesis continue as the author's diploma thesis.
|
|
|
Eliminator of dental calculus
Šobich, Adam ; Sekora, Jiří (referee) ; Rozman, Jiří (advisor)
Bachelor’s thesis is focused on system design of eliminator of dental calculus operating at a frequency of 27 kHz and reaching the intensity of ultrasound on the applicator tip to 5 W/cm2. The work analyzes problems of dental calculus, principle of ultrasonic waves and the physical phenomena occurring in the environment, which it passes. Another part of the work describes the creation of waves using ultrasonic transducer and the amplification of ultrasound in the waveguide. Practical part of work is presented by functional diagram, which describes the sequence and function of the main parts of the device. The Bachelor’s thesis presents individual steps for design of applicator and the circuit for eliminator of dental calculus, including calculations and diagrams. The resulting circuit is experimentally verified and supplemented with draft of the printed circuit board.
|
|
|
Ultrasonic measurement system for the analyzing of air floating around the PV module
Ondraczka, Lukáš ; Jandová, Kristýna (referee) ; Vaněk, Jiří (advisor)
The work deals with development and assembly of a prototype of the analog part of ultrasonic measurement system for the analyzing of air floating around the photovoltaic module. This prototype consists of the exciter, amplifier, ultrasonic transducers and receiver. The work builds on Ing. Jiří Hofman’s previous work, where was also created a prototype’s block diagram. The work uses PSPICE for prototype development and laboratory tests for its assembly. Due to the scale of work will this bachelor thesis continue as the author's diploma thesis.
|
|
|
Precision Ranging Using Ultrasound Waves
Hlaváč, Štěpán ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This project describes solutions of the precision rating using ultrasound waves with range measurement distance to 20 cm. It informs about basic properties of ultrasonic waves and its distribution in the environment. Selects the most appropriate methods for implementing distance meter. The document includes a proposal for block design and functional solutions to individual blocks of the device. This paper contains informations which was measured in the laboratory. The selected part of the design is simulated in PSpice program. It describes the implementation process and the precision of measurement.
|
|
| |
guest ::
